Горизонтальная молотковая мельница применяется для измельчения частиц в процессах помола. Она состоит из горизонтального приводного вала, на котором подвешены вертикальные молотки для измельчения любых рыхлых и волокнистых сухих материалов с низким содержанием жира.
область клиента
EASY, VERSATILE AND RELIABLE
La Meccanica’s hammer mills are characterized by:
- function-oriented design
- heavy-duty construction
- two- or four-pole motor
- motor power from 15kW up to 250kW
- direct coupling of rotor through an elastic coupling
- bidirectional rotation
- rotor with dynamic balance
- screen that can be manually withdrawn from the side of the mill
- bearing temperature control
- temperature sensor PT 100
- access door to the grinding chamber equipped with a safety block system
- quick sieve change
- fast and easy hammer change
- easy replacement of grids
- automatic mill dosing
- pneumatically and manually reversible inlet flap
- low noise and long live trough low wear bearings
Each hammer mill is supplied with:
- Screen
- A set of hammers
- Elastic coupling
- Vibration absorbers.
Technical features
| Motor speed | 3000 RPM |
| Hammer speed | 96 m/sec |
| Rotor diameter | 484 mm |
| Model | MM020-2P | MM060-2P | MM100-2P | MM150-2P | MM180-2P | MM220-2P |
| Main motor kW | 15 | 45 | 75 | 110 | 132 | 160 |
| Screen surface m² | 0,26 | 0,44 | 0,7 | 1,13 | 1,25 | 1,72 |
| Screen length mm | 117 | 308 | 437 | 785 | 870 | 1.191 |
| Filter surface m² | 15 | 30 | 41 | 75 | 85 | 120 |
| Air mc/min | 19 | 37 | 55 | 100 | 110 | 156 |
| Hammers | 16 | 28 | 40 | 80 | 88 | 120 |
| Capacity (MTH) corn Sieve Ø 4 mm | 3,3 | 10 | 16,5 | 24,0 | 29,0 | 35,0 |
| Capacity (MTH) barley Sieve Ø 4 mm | 1,1 | 3,5 | 4,0 | 6,0 | 7,5 | 9,0 |
| Drawing pdf/dwg | MM100-2P-2016.pdf | MM150-2P-2016.pdf | MM180-2P-2016.pdf | MM220-2P%20data%20sheet.pdf | ||
| MM020-2P-rev01_1.dwg | MM060-2P%20%281%29_0.dwg | MM100-2P.dwg | MM150-2P.dwg | MM180-2P.dwg | MM020-2P%20%281%29.dwg |
| Motor speed | 1100 RPM |
| Hammer speed | 96 m/sec |
| Rotor diameter | 1080 mm |
| Model | MM180-4P | MM220-4P | MM270-4P | MM340-4P |
| Main motor kW | 132 | 160 | 200 | 250 |
| Screen surface dm² | 1,41 | 1,77 | 2,24 | 2,81 |
| Screen length mm | 480 | 600 | 760 | 955 |
| Filter surface m² | 50 | 64 | 80 | 102 |
| Air mc/min | 66 | 83 | 105 | 135 |
| Hammers | 96 | 120 | 168 | 192 |
| Capacity (MTH) mais Sieve Ø 4 mm | 29,0 | 35,0 | 44,0 | 55,0 |
| Capacity (MTH) barley Sieve Ø 4 mm | 7,5 | 9,0 | 11,0 | 14,0 |
| Drawing pdf/dwg | MM180-4P-2016.pdf | MM220-4P_0.pdf | MM270-4P-2016.pdf | MM340-4P-2016.pdf |
| MM180.4P.002_0.dwg | MM220-4P-catalogo.dwg | MM270-4P.dwg | MM340-4P.dwg |
