Skip to main content

Counterflow cooler

The counterflow cooler represents the solution with the best cost/performance ratio of pellet cooling. With rotary distributor, the pellets can be cooled evenly in the bin room. Cooling air reverse the pellets and the pellet is cooled from the bottom to top gradually, thus the cooling time is increased.
La Meccanica's counterflow pellet cooler is characterized for: grid discharger driven by 1.1 kW-21 rpm gear motor with brake and limit switch, discharging speed adjustable through hand wheel, rotary valve 350 in stainless steel, hood and bin walls with mild steel reinforcements, hard glass inspection door with door switch, stationary and adjustable product distributor, two product rotating sensors, pneumatic discharger closing when power fails.

- Grid discharger, driven by 1.1 kW-21 rpm gear motor with brake and limit switch. Discharging speed adjustable through hand wheel. Standard grid: 3-10 mm pellets, maximum length 30 mm.
Incl. pneumatic clean out
- Rotary valve 350, stainless steel, 0.75 kW-28 rpm gear motor
- Hood and bin walls: stainless steel with mild steel reinforcements, hard glass inspection door with door switch
- Product distributor: stationary and adjustable
- Two product sensors: rotating, with holder for adjustment
- Hopper: with central outlet, 250x250 mm
- Surface treatment: spray-coated with one layer of coating high build cream RAL 1015
- Pneumatic discharger closes when power fails.

Technical features

Model Capacity pellets T/h Cooling surface m² Extractor motor drive (kW)    
RCC 12x12 2,5 - 3,5 1,44 0,55 kW - 21 rpm
RCC 14x14 3-5 1,96 1,1 kW - 21 rpm RCC-14x14_42.pdf RCC-14x14.dwg
RCC 19x19 7-9 3,61 1,1 kW - 21 rpm RCC-19x19_0.pdf RCC-19x19.dwg
RCC 19x24 11-15 4,56 1,1 kW - 21 rpm RCC-19x24_0.pdf RCC-19x24.dwg
RCC 24x24 15-20 5,76 1,1 kW - 21 rpm RCC-24x24_0.pdf RCC-24x24.dwg
RCC 24x28 19-25 6,72 1,1 kW - 21 rpm RCC-24x28_1.pdf RCC-24x28.dwg
RCC 28x28 20-30 7,84 1,1 kW - 21 rpm RCC-28x28_0.pdf RCC-28x28.dwg